EP2008

Pedders Urethane Bushes

Pedders Urethane bushes have a high capacity to bear tension, compression and friction and retain their hardness, even under the most adverse conditions. This makes them well suited to the demands of heavy load carrying, firm suspension control or where regular exposure to corrosive materials is expected.

Features & Benefits

• Hardened crush tubes for longer life and to eliminate slippage or creep.
• A double helix, used against the outer diameter of the crush tube. The double helix maintains axial location while allowing full rotation of the pivot. It also acts as a grease reservoir that further increases product life.
• Knurling. For extra protection against adverse wear in heavily laden bushings.
• Bullet Grooves. These provide the correct pre-load while at the same time accommodating a wide variance in sizes and maintaining free pivoting of the bushings

Bush Type	ML186
Outer Diameter [mm]	29
Inner Diameter [mm]	19.2
Length [mm]	29.5
C/Tube Size	19x16x60 mm
Material	PU (Polyurethane)
Flange Thickness [mm]	5

Compatibility
Mitsubishi	Lancer	LB & LC	LB & LC | 1977-1981	BUSHES	Idler Arm &/or Bush Kit	Urethane Steering Idler Bush (29mm OD) (1 PKT)
Toyota	Corona	MK11, MX10 & MX20, 6Cylinder Sedan & Coupe	MK11, MX10 & MX20, 6Cylinder Sedan & Coupe | 1972-1977	BUSHES	Idler Arm &/or Bush Kit	Urethane Steering Idler Bush (29mm OD) (1 PKT)
Toyota	Hilux 2WD	LN / RN30 / 40, LN30 & LN40	LN / RN30 / 40, LN30 & LN40 | 1978-1983	BUSHES	Idler Arm &/or Bush Kit	Urethane Steering Idler Bush (29mm OD) (1 PKT)
Toyota	Hilux 2WD	LN / RN30 / 40, RN30, RN31, RN40 & RN41	LN / RN30 / 40, RN30, RN31, RN40 & RN41 | 1978-1983	BUSHES	Idler Arm &/or Bush Kit	Urethane Steering Idler Bush (29mm OD) (1 PKT)
Toyota	MKII	MX10 & MX20	MX10 & MX20 | 1972-1977	BUSHES	Idler Arm &/or Bush Kit	Urethane Steering Idler Bush (29mm OD) (1 PKT)